How to Clean Shower Head with Vinegar Like a Pro?

Shower heads often become dirty with time, and to keep them clean and tidy, you must follow the right cleaning method.

If you are not into regular cleaning, then your shower head might be clogged, and to make it clear, you must do deep cleaning.

Instead of using different cleaners that contain chemicals, read this guide carefully, where I will explain how to clean the shower head with vinegar in the correct way.

 

Things and Materials for Cleaning Shower Head

It is important to find time from your busy schedule to clean all the important things before it becomes too late and you need to replace them. You spend a lot of time in washrooms, so each accessory or item must be working fine.

The things needed to clean the shower head are:

Cleaning Shower Head with Vinegar

Vinegar is the most useful and powerful ingredient that is used for cleaning purposes. It instantly lets you eliminate all the dirt and makes the surface clean. It can be the best product for clogging purposes if you use it correctly.

Below I will share how to use vinegar for removable and non-removable shower heads. You can use the one that fits your requirement.

---

Follow the below-mentioned steps if your shower head can be removed, but you do not know how.

Bring all the Tools

The first step requires gathering all the tools earlier so that you do not have to pause every time you need something. If your shower head can be removed, then it will make cleaning more efficient.

Be prepared with a bucket or a large container that you can easily keep below the shower head. You must have white vinegar, a toothbrush to clean hard stains, a soft cloth, etc.

Start Removing

You have to twist the head counterclockwise with the help of a wrench so that it can easily be removed. It will not take much time, and you will not need to put excessive pressure.

Keep the Showerhead Safely

Now get your hands on a small container or pot where you can safely keep this showerhead. Ensure the bucket size must be appropriate because later, you have to add vinegar to it.

Add White Vinegar

Different kinds of mineral deposits enter your showerhead, so cleaning them with vinegar will help fight against these minerals. The ratio of vinegar to water for cleaning must be appropriate.

Keep the Vinegar Overnight

If your showerhead is too clogged, then it is better to leave the vinegar solution overnight to work effectively. However, if you cannot wait for long, then at least let the head soak in the vinegar for some time; otherwise, all your hard work will go in vain.

Another method to save time is to put the pot full of vinegar and showerhead on heat and then leave it for at least 15 to 30 minutes. It will also work.

Rinse the Showerhead

Once the time is over, remove the head from the pot and then rinse it so that the vinegar is completely removed.

Use a Toothbrush for Scrubbing

You are not done yet because scrubbing is the main part of cleaning. If there is any hard stain that could be washed away with vinegar, then you can gently use a toothbrush that guarantees to wash away all the hard residues as well.

Keep using the brush until the head becomes residue-free.

Clean the head with a Soft cloth

Now properly clean the showerhead with a soft cloth to remove excess water or vinegar. Now you can attach the showerhead back as it is all set to be used again.

---

A few showerheads can not be removed, so you can clean them without detaching them. The steps involved in this method are:

Collect all the Items

As previously mentioned, you have to gather all the important items needed in this process, including vinegar, soft cloth, toothbrush, etc. A few other items this process requires are string and plastic bags.

Make sure the size of the bag is large so that you can easily cover the shower head. Now proceed to the next step.

Add Vinegar to the Bag

Now you have to fill the plastic bag with the white vinegar but check the quantity. If you fill the entire bag, the vinegar will pour out when you place the showerhead into it. Fill half bag with vinegar.

Cover Showerhead with Bag

Place the bag in a way that the entire shower head is covered with it. Once it is done, do not forget to tie it with a string, so it doesn’t fall. After tieing it with a string, wait for some time to check whether it is correctly tied or not.

Wait Overnight

If your showerhead is dirtier, then you have to soak it in vinegar overnight, but if you are into regular cleaning and it is not too dirty, then 30 minutes would be enough.

How much time you have to soak the head also depends on the material. 30 minutes are enough for a gold and brass showerhead.

Pull out the Bag

Once the time is over, pull out the bag and be cautious while removing it. The vinegar drops must not enter your eyes and you can also wear safety goggles.

Do Not Forget to Scrub

Scrubbing is the main part in order to remove hard stains. If you find any, take your old brush with soft bristles and start rubbing with gentle hands. Keep scrubbing until the stains are fully eliminated.

Use soft cloth

Once you are done with everything, rinse the head again and use a soft cloth. You have successfully cleaned your clogged shower head.

FAQs – Frequently Asked Questions

This article has given you all the details regarding how to do shower head removal and what type of vinegar for cleaning is required. If you are still doubtful, then let’s check all these excessively asked questions.

How Long Should You Soak Your Shower Head in the White Vinegar?

It depends on how dirty the showerhead is or what kind of material it is made of. You can also leave it overnight, and a few materials require only 30 minutes of soaking, including gold and brass.

Will Vinegar Damage My Shower Head?

No, vinegar is the best ingredient that you can use for cleaning purposes. It doesn’t harm the surface in fact helps you clean every small and large mineral deposit thoroughly.

Does Vinegar and Baking Soda Clean the Shower Head?

Vinegar and baking soda are the best combinations when you want to clean spills. When you combine both these ingredients in dish soap, it surely gives effective results. Hence, you can clearly use this combo without thinking twice.

How Do I Clean My Shower Head with Distilled Vinegar?

Distilled vinegar is the best ingredient that you can use to clean your shower head. If it is removable, you can take a container and add vinegar and showerhead inside it overnight (if required).

If it is not removable, you can cover your showerhead with a plastic bag after adding the distilled vinegar and tie it with a string so that it does not fall.

Does White Vinegar Clean Shower Heads?

Yes, they guarantee to clean mineral deposits and other stains from the showerhead and deeply clean every spot.

Final Thoughts

Have you ever used white vinegar for cleaning purposes and it actually turned out effective? Indeed, it is considered the best ingredient that lets you get rid of even tough stains in no time.

When you combine Vinegar with baking soda, it shows better results. In this guide, I have mentioned the points in detail so that you can pick the one that suits your requirement.

Whether your shower head can be removed or not, you can get detailed help in this guide. It is important to regularly clean every corner and area of your washroom that is used on a daily basis so that no mineral deposit or other stains occurs.

Apart from shower heads, vinegar can be used on other accessories as well for cleaning purposes.